F2 408383 2207 Notice D'utilisation page 9

Assembly
Assembling the paddle (Fig. B)
Note:
Note:
Disassembling the paddle
Assembling the kayak paddle
(Fig. B)
Inflating the board
WARNING!
IMPORTANT!
Inflation sequence
Filling the air chambers
Important!
• The optimal operating pressure for
both air chambers is 1.0bar (15psi).
• The inner air chamber expands after
inflation and presses on the outer air
chamber , which can increase the
operating pressure of the outer air
chamber to more than 1.0bar (15psi).
• Because fluctuations may occur, check
the air pressure in the outer air cham-
ber once more after inflating the inner
air chamber and adjust the operating
pressure accordingly, if necessary.
Note:
Note:
Deflating (Fig. E)
Mounting the US fin (Fig. F)
Note:
Note:
Removing the US fin
Installing the foot roll (Fig. G)
Installing the seat (Fig. H)
Use
Adjusting the paddle length
height + 20cm
(8inches).