Publicité
Step 14
å
Fasten the TOP (D) to the TOP of the other desk. Use two PLATES (41G) and eight
BLACK 9/16" LARGE HEAD SCREWS (1S).
å
Your unit may need leveling. To raise a corner of your unit, rotate the LEVELER
downward. To lower a corner of your unit, rotate the LEVELER upward.
å
Insert a GROMMET (2P) and GROMMET CAP (3P) into each large hole in the TOP (D).
3P
2P
To raise a corner of your
unit, rotate the LEVELER
downward. To lower a
corner of your unit, rotate
the LEVELER upward.
www.sauder.com/commercial-office/service
D
BLACK 9/16" LARGE HEAD SCREW
41G
1S
(8 used in this step)
427440
Page 19
Publicité
