FLORABEST FSTF 20 A1 Traduction Des Instructions D'origine page 6

■ Make sure that no dirt particles clog the con-
nections or get inside the hose . Otherwise,
the spigot could be damaged .
■ Make sure all connections are tightly fit .
■ After each use, turn off the spigot .
Assembly and connection
1 .) Remove the hand crank
of the hose reel .
2 .) Insert the hand crank
opening until it clicks into place .
3 .) Remove the spigot adapter
holder .
4 .) Unwind the hose
spray nozzle connector
5 .) Unscrew the spigot piece
adapter and screw it onto the spigot .
6 .) Attach the spigot adapter
piece .
FSTF 20 A1
from the back
in the intended
from the
completely and remove the
from the holder
from the spigot
to the spigot
7 .) Remove the spray nozzle
and attach it to the spray nozzle connector
8 .) Turn on the spigot .
9 .) After completing your work, turn off the spigot .
.
10 .) Remove the spigot adapter
piece by loosening and pulling it .
11 .) Unscrew the spigot piece
and attach it back onto the spigot adapter
12 .) Remove the spray nozzle
pump sprayer connector
spray nozzle
13 .) Guide the hose
and place the spray nozzle connector
the holder
from the holder
from the spigot
from the spigot
from the garden
and place the
back in the holder
through the hose guide
.
GB │ IE │ NI
.
.
.
in
│ 3 ■