iComfort SAU1570-C Manuel De L'utilisateur page 8

6. Place the front panel in the slot of floor panel, then lock the two inside
latches between front and right side panel and between front and left side.
7. Place the top panel on the five side panels. Make sure the connection
wires of three side panels (left back, right back & front) protudes through
the corresponding holes of the top panel.
Make sure the top panel with fluorometry is facing to the front (picture 1)
Make sure the wire is through each hole smoothly and completely (picture 2)
Make sure the trim of the top panel fits completely around five side panels
Make sure each of the lead wires on the top of the left back, right back and
front panel is protuding through the top panel; then plug each of the three
lead wires into the three connectors of the top panel (picture 4-5)
picture 1 picture 2
picture 3 picture 4
8