CLAS PE 6000T Mode D'emploi page 35

PE 6001
PE 6000T
MOBILE SCISSOR LIFT DUAL CYLINDER LOW RAISE 3T MOVABLE ELECTRO HYDRAULIC LIFT
Installation scheme for scissor lift:
Concrete type 425#, drying time is 15 days.
.
Thickness of concrete ≥150mm, alignment of the entire lenght ≤5mm.
The minimum concrete thickness and leveling are the key features that must be respected
in order to ensure the correct alignment of the deck.
PARTS OF VEHICLES TO PAY ATTENTION TO:
THE LOWER PARTS OF VEHICLES, LIKE SPORTIVE CAR UNDERBODY, CAN MAKE
INTERFERENCE WITH THE STRUCTURAL PARTS OF THE LIFT.
The lift will also handle custom or non-standard vehicles, provided that they are within the
maximum specified load capacity.
The personal safety area must also be defined in relation to the non-standard vehicle.
P1
image 4(installation)
P2
35 35