Publicité
Les langues disponibles
Les langues disponibles
Adjusting the chronograph: hands to zero position
This procedure should be performed when one or
several chronograph hands are not in their correct
zero positions and have to be adjusted (e.g. following a
battery change).
Pull out the crown to position II (all three chronograph
hands are in their correct or incorrect zero position).
Keep push buttons A and B depressed simultaneously
for at least 2 seconds (the chronograph second hand
rotates by 360° → corrective mode is activated).
Adjusting the chronograph second hand
Single step: press button A 1 x short.
Continuous: press button A long.
Adjusting the next hand: press button B.
Adjusting the hour counter (position 6h)
Single step: press button A 1 x short.
Continuous: press button A long.
Adjusting the next hand: press button B.
Adjusting the minute counter (position 9h)
Single step: press button A 1 x short.
Continuous: press button A long.
Returning the crown to normal position
Termination of the chronograph hands
adjustment (can be carried out at any time).
Water Resistance Table
Level of
Suitable
water re-
everyday
sistance
use
None
3 ATM
30m/100ft
5 ATM
50m/150ft
10 ATM
100m/300ft
6
Can with-
stand ac-
Suitable
cidental
for swim-
splash-
ming
ing
Suitable
Suitable
for snor-
for pool
kelling
side
or water
sports
Suitable
for high
board
diving or
sub-aqua
diving
Publicité
