Publicité
Read the safety information on this page before deploying or configuring your Aqua TROLL
800. If you have questions, contact In-Situ Technical Support for assistance.
• Use only D-cell alkaline batteries.
• Do not use the Aqua TROLL 800 in any manner not specified by the manufacturer.
• Do not use batteries of different ages or types.
• Do not submerge the Twist-Lock connector ends of the cable or instrument when they are not connected.
• Do not submerge the Wireless TROLL Com or your mobile device in liquid.
• Ensure that sensors or sensor plugs, are completely inserted into the ports, so that no liquid can enter the
instrument.
• Ensure that the RDO Sensor Cap is pressed firmly over the sensor lens and is flush with the instrument
before submerging in liquid.
• Replace the cable if insulation or connectors are damaged.
• Make sure the probe and sensor O-rings are clean and free of damage.
Intended Use
The Aqua TROLL® 800 Multiparameter Sonde is designed to be safe:
• during indoor or outdoor use;
• in ambient temperatures from -5 to 50° C;
• above or below 2000 m;
• in any relative humidity levels;
If the equipment is used in a manner not specified by the manufacturer, the protection
provided by the equipment may be impaired.
1-800-833-7958
Safety
4
www.geotechenv.com
Publicité
