Publicité
Les langues disponibles
Les langues disponibles
THE COLOR LCD DISPLAY
The color LCD display shows the settings,
estimated time remaining, options, and status
messages for your washer. When the washer is
turned on, the light in the display will illuminate.
STATUS/CYCLE DISPLAY
A
This portion of the display shows the selected
cycle, operating status, and special messages.
If a cycle has special instructions, they will also
be displayed in this area.
ESTIMATED TIME REMAINING
B
When the START/PAUSE button is pressed, the
washer automatically detects the wash load
(weight) and optimizes the washing time, based
on the selected cycle and options. The display
will then indicate the estimated time remaining
for the selected wash cycle.
NOTE: The cycle time displayed may appear
much longer than that of a top-loading washer.
The displayed time is for the complete cycle,
rather than just the agitation portion of the cycle,
as is typically shown on a top-loading washer.
CYCLE COMPLETION INDICATOR
C
Shows how much of the current wash cycle has
been completed.
CYCLE NAME INDICATOR
D
This indicator shows the operating cycle.
E
STEAM INDICATOR
This indicator shows that the washer has been
set for the STEAM option.
PRE-WASH INDICATOR
F
This indicator shows that the washer has been
set for the PRE-WASH option.
WATER PLUS INDICATOR
G
This indicator shows that the washer has been
set for the WATER PLUS option.
DRUM LIGHT INDICATOR
H
This indicator shows that the washer has been
set for the DRUM LIGHT option.
H O W TO U S E
D
A
C
J k
E
F
G
H I
I
WASH/RINSE OPTIMIzER™ INDICATOR
This indicator shows that the washer has been
set for the WASH/RINSE OPTIMIZER™ option.
J
CHILD LOCk INDICATOR
When CHILD LOCK is set, the Child Lock
indicator will appear and all buttons are
disabled except the ON/OFF button. This
prevents children from changing settings
while the washer is operating.
k
DOOR LOCk INDICATOR
Indicates that the door is locked. The washer
door will lock while the washer is operating. The
door can be unlocked by pressing the START/
PAUSE button to stop the washer.
NOTE: If the temperature in the washer is too
high, the door cannot be unlocked until the
washer has cooled. If the water level is too high,
select the Drain & Spin cycle (see the page 23 for
details) to drain excess water. Do not try to force
open the door.
L
CYCLE SETTING INDICATORS
These indicators show the current cycle settings
for WASH/RINSE, SPIN SPEED, SOIL LEVEL,
and BEEPER. To change these settings, press the
appropriate settings button.
NOTE: To protect your garments, not every wash/
rinse temperature, spin speed, soil level, or option
is available with every cycle.
B
L
21
Publicité
