Publicité
Les langues disponibles
Les langues disponibles
Conversion to Natural Gas
!
Contact an authorized Napoleon dealer to obtain a natural gas conversion kit approved for
use with this appliance.
The conversion must be performed by a licensed gas fitter.
Lava Rock Installation
WARNING!
WARNING!
!
replacing, use only replacement lava rocks available from an authorized dealer / distributor.
1. Carefully place the lava rocks onto the appliance's burner tray.
2. Spread the lava rocks evenly over the burner tray.
3. The rocks must cover the entire burner tray while ensuring that the ignition portion of the burner is
clear of obstruction as illustrated below.
!
ENSURE NO ROCKS ARE BLOCKING ANY OF THE OPEN PORTS ON THE IGNITION
PORTION OF THE BURNER, DIFFICULTIES IN LIGHTING MAY RESULT.
Lava Rock Conditioning Instructions
!
CAUTION!
lava rocks at a high temperature to avoid potential personal injury.
1. Place a single layer of lava rocks on the burner tray as shown above.
2. Follow the Lighting instructions in this manual to light the burner.
3. Set temperature to maximum heat.
4. Allow the lava rocks to heat at maximum temperature for 30 minutes.
N415-0546 MAR 09.20
Do not use the patio flame without the lava rock in place.
Real rocks must not be used in this appliance. Heat will cause them to explode. If
Lava rocks may react to heat by throwing fragments of rock. Be sure to condition the
9
EN
www.napoleon.com
Publicité
