Publicité
Les langues disponibles
Les langues disponibles
14
Reinstallation: Reverse the procedure to reinstall the burner. Check that the valve enters the burner
when installing. Replace the lava rock. When the appliance is put back in service, check the burner flame
EN
pattern with the image below.
NORMAL
ABNORMAL
Cleaning The Outer Appliance Surface: Do not use abrasive cleaners or steel wool on any painted, or
stainless steel parts of your Napoleon Appliance. Doing so will scratch the finish. Exterior surfaces should
be cleaned with warm soapy water. To clean stainless surfaces, use a stainless steel or a non-abrasive
cleaner. Always wipe in the direction of the grain. Over time, stainless steel parts discolor when heated,
usually to a golden or brown hue. This discoloration is normal and does not affect the performance of the
appliance
!
WARNING!
other flammable vapors and liquids. Do not obstruct the flow of combustion and ventilation air. Keep
the ventilation opening of the cylinder enclosure free and clear of debris.
www.napoleon.com
The appliance area must be clear and free from combustible materials, gasoline and
N415-0546 MAR 09.20
Publicité
