Publicité
Les langues disponibles
Les langues disponibles
PRE-SETUP
CHECK LIST
To check the parts printed on the package/in the manual,
verify that the equipment components represent the model
that you had intended to purchase. In case of any damaged
or missing parts at the time of purchase, visit our website
bestwaycorp.com/support.
CHOOSE THE CORRECT LOCATION
Indoor and outdoor & above ground & portable wiring &
portable spa.
Only For Spas Equipped With Wi-Fi:
To choose the correct location for the spa equipped with
Wi-Fi, read the Spa Wi-Fi instruction leaflet included in the
package and the following instructions.
For All Spas:
The surface chosen to install the pool must respect the
following technical characteristics.
• Because of the combined weight of the water inside the spa
and the users, it is extremely important that the surface
chosen to install the spa is capable of uniformly supporting
the total weight for the entire time the spa is installed.
• An adequate drainage system has to be provided to deal
with overflow water for both indoor and outdoor
installations. During filling, draining or when in use, water
may flow out of the spa.
• The surface must be flat and smooth. If the surface is
inclined or uneven, it can create an unbalanced loading on
the structure of the spa. This situation can damage the
welding point.
• The selected surface must be clear of any type of object.
Due to the weight of the water, any object under the spa
could damage or perforate the bottom of the spa.
• The selected location must not have overhead power lines
or trees. Be sure the location does not contain underground
utility pipes, lines or cables of any kind.
8
Publicité
