Uline S-7451 Instructions D'assemblage page 2

4. Secure lid on pail with pneumatic or manual pail closer.
See proper closure instructions, included with S-7344
pail.
5. Place pail into carton, bottom first.
6. Fold flaps on top of carton so they meet. (See Figure 3)
NOTE: "THIS SIDE UP" must be visible on the outside
of the carton.
7. Seal top of carton down the center seam with one strip
of 2" wide (2 mil) polypropylene tape (Uline model
# S-472). The tape must extend 3" over each end of the
carton. (See Figure 4)
PAGE 2 OF 6
ASSEMBLY CONTINUED
1-800-295-5510
uline.com
Figure 3
Figure 4
0724 IS-7451