Publicité
Les langues disponibles
Les langues disponibles
Use the Remote Controller
WARNING:
Forward button
Reverse button
Speed select button
Attach the batteries of controller
Lift the battery compartment door on the back of the controller and insert two
AAA(LR03) batteries.
HINT: Batteries not included. Refer to the Battery Information on the page 1.
1. Build connection
Long press the forward and reverse buttons for 3 seconds, and the speed indicator
flashes. Then power on the vehicle, the speed indicator goes to long bright, means the
connection successful. If the speed indicator no response, means the connection
failed. Replace the batteries and retry.
2. Brake button
Press the button to stop the vehicle, press it again to release the brake.
3. Speed select button
The switch operates the vehicle to move in low, normal or high speed.
HINT: This switch won't work while your vehicle moves reverse.
NOTE:
• Leave the remote controller idling for about 10 seconds, it will shut down
automatically.
• Rebuild connection when you replace the batteries of the remote controller.
ADULT OPERATING REQUIRED!
Speed indicator
Brake button
Right button
Left button
13
Publicité
