Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION INSTRUCTIONS
1.
The refrigerator should be located in a completely flat
surface. Leave 2~4 inch between each side of the
appliance and the wall, and leave 12 inch between the top
of the appliance and the ceiling.
2.
Choose a location which is not exposed to sunlight, high
temperature or humid, as humidity may cause stain.
3.
Pull out the bottom panel before installation.
4.
The appliance can be adjusted by rolling its two legs in front
when it is unstable. Rolling in clockwise can level up the
machine.
5.
The location should be firm and flat. An un-securely position
may cause noise and libration:
(a) The noise may be increased if the floor is not firm.
(b) Put a sheet under the appliance for solving the heat
emission if you need to locate it onto a carpet.
6.
Make sure the adjustable legs are clung to the floor,
and set the appliance slope backward slightly for keeping the
doors closed tightly.
4
12 inch
2 inch
Publicité
