Publicité
Les langues disponibles
Les langues disponibles
The pin position of the ISO connector will differ
depends on the type of vehicle. Connect 6* and
7* when Pin 5 is an antenna control type. In
another type of vehicle, never connect 6* and 7*.
Blue/white
To system control terminal of the power
amp (max. 300 mA 12 V DC).
Blue/white (6*)
+
Front speaker
≠
Left
+
Rear speaker or
Subwoofer
≠
Speaker leads
: Front left +
White
: Front left ≠
White/black
: Front right +
Gray
: Front right ≠
Gray/black
: Rear left + or Subwoofer +
Green
: Rear left ≠ or Subwoofer ≠
Green/black
: Rear right + or Subwoofer +
Violet
: Rear right ≠ or Subwoofer ≠
Violet/black
Connecting cords
with RCA pin plugs
(sold separately)
System remote control
Blue/white (7*)
To Auto-antenna relay control terminal
(max. 300 mA 12 V DC).
+
≠
+
≠
Perform these connections when using a different amp
(sold separately).
Note:
When a subwoofer is connected to this unit instead of a rear
speaker,change the the rear output setting in the Initial
Setting. (refer to the Operation Manual)
The subwoofer output of this unit is monaural.
Power amp
(sold separately)
Power amp
(sold separately)
Front speaker
Right
Rear speaker or
Subwoofer
Fig. 2
4
Publicité
