Costway EP25183 Mode D'emploi page 7

Technical data
Model
Voltage/Frequency
Rated power
Max flow
Max pressure
Max. self-absorbing suction height
Max. delivery head
Socket diameter
Safety class
G.W./N.W.
Intended use
EP25184
This model of Electric booster pump enables to maintain the
required pressure in a pressurized pipeline. Thanks to this feature,
the device can be used for water supply systems arrangement, for
boosting water to low pressure in a water supply system, etc. It is
possible to keep the pump operating also for a long period of time.
EP25183
This tool is designed for the irrigation and watering of green areas,
vegetable beds and gardens, for operation of lawn sprinklers, for
drawing of water (with pre-filter) from ponds, streams, rain barrels,
rainwater cisterns and wells, for supply of water to the house and
for the pumping of clear water, rainwater or light suds/service
water.
This equipment has not been designed for use in commercial, trade
or industrial applications.
12
EP25184 EP25183
120V/60Hz 120V/60Hz
1200W 1200W
3800L/h 3800L/h
5 bar 5 bar
8m 8m
50m 50m
1" 1"
I I
29.5/26 LBS 25/22 LBS
Installation
Install the equipment on a solid and level surface. The pump must
be placed as near as possible to the water level, while still
maintaining a safe distance.
Receiver (EP25184)
To ensure the proper operation of the machine, it is necessary to
maintain a certain pressure within the receiver( 11 ). If the pressure
drops, connect a car pump or compressor to the slide valve ( 13 )
and pump until pressure within the receiver ( 11 ) reaches the
minimum level for the pressure of the water supply system.
Connecting the suction
hose(EP25184, EP25183)
The diameter of the suction hose
must not be smaller than that of the
suction socket (4). The suction hose
is connected to the unit using a
threaded connecting pipe (not
available in this set), which is
threaded into the thread orifice of
the suction socket (4). [F1]
The suction hose must be slightly angled up towards the suction
socket (4) to avoid the formation of air locks. Ensure that the
suction hose connection is hermetic; this will prevent air blocking
and secure normal operation of the machine. Make sure that the
suction hose is completely airtight and immersed in water.
F1
13