RIDGID R3121 Manuel D'utilisation page 8

ASSEMBLY
UNPACkING
This product has been shipped completely assembled.
 Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing list
are included.
WARNING:
Do not use this product if it is not completely
assembled or if any parts appear to be missing
or damaged. Use of a product that is not properly
and completely assembled could result in serious
personal injury.
 Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
 Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the product.
 If any parts are damaged or missing, please call
1-866-539-1710 for assistance.
PACkING LIST
Variable Speed Orbital Jig Saw
1.25 in. Dust Collection Vacuum Attachment
Chip Shield
No-Mar Base Plate
T-Shank Blade
Cord Wrap
Tool Bag
Operator's Manual
OPERATION
WARNING:
Do not allow familiarity with this product to make
you careless. Remember that a careless fraction
of a second is sufficient to inflict severe injury.
WARNING:
Always wear eye protection marked to comply
with ANSI Z87.1. Failure to do so could result in
objects being thrown into your eyes resulting in
possible serious injury.
WARNING:
If any parts are damaged or missing do not operate
this product until the parts are replaced. Use of
this product with damaged or missing parts could
result in serious personal injury.
WARNING:
Do not attempt to modify this product or create
accessories not recommended for use with this
product. Any such alteration or modification is
misuse and could result in a hazardous condition
leading to possible serious personal injury.
WARNING:
Do not connect to power supply until assembly
is complete. Failure to comply could result in
accidental starting and possible serious personal
injury.
WARNING:
Do not use any attachments or accessories
not recommended by the manufacturer of this
tool. The use of attachments or accessories not
recommended can result in serious personal
injury.
WARNING:
To avoid possible serious injury, keep hands and
fingers away from the area between the gear
housing and saw blade clamp, and keep the chip
shield in place.
8 - English