Costway FP10807US Mode D'emploi page 8

EMBER BED
Each time the Ember Bed Button is pressed, the color of the ember bed
changes. There are 7 colors(d8-d2) and dynamic condition(d1) you can cycle
through.
When any of the ember bed colours are selected (d8 to d2) and displayed,
pressing the Level Increase / Decrease Button can be used to change the
brightness level of the Ember bed. Again three option are available:
5-4-3-2-1.
INCREASE/DECREASE
This button is used to adjust levels for the flame, ember bed and heater
settings. See relevant section for more details.
1 4
REMOTE CONTROL
Power
The Power Button turns the fireplace ON and OFF.
Heater
The Heater Button turns the heat ON and OFF.
Press "+" or "-" button to setting the temperature.
Flame
The Flame Button turns the flames ON and OFF.
Press "+" or "-" button to setting the flame color.
Ember Bed
The Timer Button turns the ember bed colors
and OFF. Press "+" or "-" button to setting the
bed colors.
Timer
The Timer Button turns the timer ON and OFF.
Press "+" or "-" button to setting the timer.
Brightness
The Brightness Button adjusts the brightness of the flame and ember bed.
The display will show 1 to 5 for the flame and ember bed effect brightness
setting.
Speed
(Remote Control Only Function)
The Speed Button is used to adjust the flame speed.
The display will show P1 to P5 for the flame speed setting.
ON
ember
15