Costway FP10807US Mode D'emploi page 7

Digital Display
NOTE: The remote control is intended only for the functional operation of the
product, it can not lock/unlock the heating function!
POWER
The power button turns the fireplace on & off. When the fireplace is off，
pressing the power button once will switch on the fireplace. Once on, if the
fireplace display is not illuminated pressing the power button will light up the
display. If the power button is pressed again within 10 seconds it will turn off
the fireplace. If the display is already illuminated then only one press of the
power button is needed to turn off the fireplace.
The power button has a built in memory function that will retain the status of
the fireplace when turned off. With the exception of the timer, the fireplace
will restart in its previous status. If the fireplace is disconnected from the
main power source it will lose the memory and restart at the default settings.
FLAME
The flame button is used to turn flames ON, to alter the flame color and to
turn flames OFF. There are 7 flame colors(L8-L2), color rotation option (L1)
and an OFF position you can cycle through. When the flame is in OFF
position, turn on the heat at this time, the ember bed will be slightly bright to
indicate that the heat has been turned on.
While L8, L7...or L2 is displayed, press the Increase/Decrease button to
change the brightness of the flames from the available options: 5-4-3-2-1.
1 2
HEATER
The heat button is used to turn the heat on and off. Pressing the Heat Button
once turns the Heat on. The display window will blink and show the
temperature. The default temperature is 82°F. Keep pressing the heat button
to set temperature between 64°F to 82°F or 18°C to 27°C. Also can press
INCREASE/DECREASE button to set the temperature.
When the temperature display stop blinking, press the heat button to turn off
the heat function.
ON means the quartz tubes keep working. When the heater was set in ON
status, if the heater was overheat and show E3, we need unplug the plug,
wait for the temperature cool down, then plug in before restarting it.
Temperature Unit Convert Function: The heater includes Celsius and
Fahrenheit temperature scales. To change the temperature unit, turn the
heater on, and then press and hold the Power Button for 5 seconds. The
current temperature unit display will flash 3 times and convert to the other
temperature unit. Note: The remote cannot convert the temperature units.
Lock and Unlock Heater Function: Press and hold the heater button for 10
seconds. The ember bed will flash 6 times, indicating that the heater function
is locked. To unlock the heater function, press and hold the heater button for
10 seconds. The ember bed will flash 6 times, indicating the heater function
is unlocked. Note: The remote cannot set the lock and unlock heater
function.
TIMER
The TIMER has adjustable setting at range from 1 hour to 9 hours and OFF.
As shown the following: 1h-2h-3h-4h-5h-6h-7h-8h-9h-OFF. If the digital
display turns on and nothing happens within 10 seconds, the digital display
will auto shut off. Once you have set the timer, and the timer is up, close all
the functions and enter standby mode. In this mode, you should touch the
power icon to restart the appliance.
13