Publicité
Les langues disponibles
Les langues disponibles
English
Initial Setup
Essential Setup
1. Place the unit on a flat and level surface. The selected location should be
stable and free from vibration.
2. Remove the plastic bag covering the radio.
3. Press Open to open the CD Door.
4. Remove the cardboard shipping card from the CD Player.
5. Unwind FM Antenna and allow it to hang straight down.
6. Connect power adaptor to the Power Jack of the unit.
Note: Do not plug the AC power adaptor to power outlet before all the assembly is
completed. Before turning the power on, make sure again all the connection settings
are correct. Always turn off the power when connecting or disconnecting.
Battery Backup
This Model includes a battery back-up circuit. The battery will maintain the clock
and alarm settings in the event of a power failure. The battery back-up requires
one 9V battery (not included). To install/replace the battery,
follow the instructions below.
1. Press in on the locking tab to remove the battery cover.
2. Attach a 9V battery to the battery contacts as shown.
3. Tuck the battery back into the battery compartment and
replace the battery cover.
Clock Setup
Setting the Clock
1. Press the Time button twice, and the hour digits will start flashing.
2. Press the Backward or Forward Skip buttons to adjust the hour while the
digits are flashing.
3. Press the Time button, and the minute digits will start flashing.
4. Press the Backward or Forward skip buttons to adjust the minute while the
digits are flashing.
5. Press the Time button to set the clock.
6. Long press the Time button to switch between 12 and 24 hour mode.
5
Publicité
