Add detergent using the dosing lid. One
capful corresponds to a 1% application.
Close the dosing lid of the fresh water
reservoir.
Release the star knob for the height ad-
justment of the steering wheel.
Adjust the steering wheel to the desired
height.
Tighten the star handle.
Adjust the dosing of the cleaning solu-
tion in accordance with the soiling and
the type of the flooring material.
Adjust the rotary handle of the brush
contact pressure to the desired value.
Only adjust the brush contact pressure
when the cleaning head is raised.
Note:
If the appliance pulls forwards too strongly
during operation, reduce the contact pres-
sure.
Bring the Eco mode switch into the de-
sired position.
Normal operation: The appliance works
at the maximum brush speed and the
highest suction performance.
Eco: The appliance works at reduced
brush speed and suction performance.
This also reduces the energy consump-
tion. The possible working time increas-
es with one charging cycle.
22
Settings
Lowering the park support
Press the steering wheel downward so
that the appliance lifts up towards the
front.
The park support swivels downwards.
Release the steering wheel.
The appliance is standing on the park
support.
The roller brush is unloaded and is pro-
tected from deforming.
Lifting the park support up
Push the appliance forwards.
The part support swivels upwards.
Transport chassis
0 Transport chassis retracted
1 Transport chassis extended
Extending the transport chassis
Lower the park support.
Turn the rotary knob to position 1
(transport chassis extended).
Retracting the transport chassis
Lower the park support.
Turn the rotary knob to position 0
(transport chassis retracted).
EN
– 6
Park support