Publicité
Les langues disponibles
Les langues disponibles
Liens rapides
USA office: Fontana
AUS office: Truganina
GBR office: Ipswich
If you're having difficulty, our friendly
customer team is always here to help.
FRA office: Saint Vigor d'Ymonville
USA:cs.us@costway.com
AUS:cs.au@costway.com
GBR:cs.uk@costway.com
FRA:cs.f r @costway.com
5-Tier Wire Shelf
Étagères Métalliques à 5 Niveaux
TA10052 / TA10053
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Publicité
Manuels Connexes pour Costway TA10052
Sommaire des Matières pour Costway TA10052
- Page 1 5-Tier Wire Shelf Étagères Métalliques à 5 Niveaux TA10052 / TA10053 USA office: Fontana AUS office: Truganina GBR office: Ipswich FRA office: Saint Vigor d'Ymonville USA:cs.us@costway.com If you're having difficulty, our friendly AUS:cs.au@costway.com customer team is always here to help.
- Page 2 ASSEMBLY INSTRUCTIONS The only tool you require is a MALLET LIST OF PARTS Before You Start Please read all instructions carefully. Retain instructions for future reference. 8x Keyhole Uprights Separate and count all parts and hardware. Read through each step carefully and follow the proper order. We recommend that, where possible, all items are assembled near to the area in which they will be placed in use, to avoid moving the product unnecessarily once 10x Long Shelf Supports...
- Page 3 2. Fit 2 Short Shelf Supports and 2 Long Shelf Supports to the 4. (GO TO 5 IF YOU ARE NOT ASSEMBLING AS A WORKBENCH) bottom boles (for maximum strength) of 4 Keyhole Uprights by a) Fit 2 Long Shelf Supports for the top of the Workbench into the slotting the Keylock Pins in the Supports into the Uprights and holes at the top of the Keyhole Uprights and fit 1 Centre Brace to tapping firmly with a hammer to seat in place (Pic 2).
- Page 4 INSTRUCTIONS DE MONTAGE Pic 5 Le seul outil dont vous avez besoin est un MALLET 6.Fit the Long Shelf Supports to LISTE DES PIÈCES the 3rd, 4th and top Shelf positions.(Pic 5) 8x Poteaux en trou de serrure 8x Pieds en 10x Supports d'étagères longues Plastique 10x Supports d'étagères courtes...
- Page 5 2. Fixez 2 supports d'étagère courts et 2 supports d'étagère longs 4. (PASSEZ AU POINT 5 SI VOUS N'ASSEMBLEZ PAS L'ÉTABLI) aux trous inférieurs (pour une résistance maximale) de 4 poteaux en a) Insérez 2 supports d'étagère longs pour le haut de l'établi dans trou de serrure en insérant les goupilles de verrouillage des supports les trous situés en haut des montants en trou de serrure et fixez une dans les poteaux et en tapant fermement à...
- Page 6 photo 5 6. Installez les longs supports Return / Damage Claim Instructions d'étagère aux positions des 3ème, 4ème et dernière étagère DO NOT discard the box / original packaging. (photo 5). In case a return is required, the item must be returned in original box. Without this your return will not be accepted.