Parkside 435176 2304 Consignes D'utilisation Et De Sécurité page 6

yourself with the product before setup or first use. To do so, please read through the following operating
and safety instructions carefully.
KEEP OUT OF THE REACH OF CHILDREN!
z Intended use
When welding, this welding helmet protects the eyes and face from sparks, splashes and UV radiation
and automatically adjusts to the lighting conditions. It ensures immediate, sensor-controlled darkening
when the arc is ignited as well as automatic lightening when welding work is finished (including short
delay for protection against afterglow). The welding helmet has an infinitely adjustable DIN protection
level with side adjustment wheel and can also be set for flying sparks during grinding work. Use the
product only as described and only for the specific applications as stated. Keep these instructions in a
safe place. Ensure you hand over all documentation when passing the product on to anyone else. Any
use that differs to the intended use as stated above is prohibited and potentially dangerous. Damage
or injury caused by misuse or disregarding the above warning is not covered by the warranty or any
liability on the part of the manufacturer. The device has been designed for household use only and must
not be used in commercial or industrial applications.
z Package contents
1 Automatic Welding Helmet
1 Set of operating instructions
z Parts description for "black" version
Viewing pane
1
Helmet casing
2
Solar cell
3
Rear lens
4
Headband
5
Rear control dial headband
6
Lateral control dial headband
7
UV filter
8
Darkening control
9
Test button
10
z Parts description for version "with flames"
Viewing pane
1
Helmet casing
2
6
GB/IE/NI/CY/MT
2 Batteries type LR03 (AAA)
Delay setting
11
Sensitivity setting
12
Low battery display
13
LED light switch
14
Battery compartment
15
Bracket
16
Arc sensor
17
LED light
19
Darkening switch
20
Solar cell
3
Rear lens
4