Orbegozo FDR 16 Manuel D'instructions page 16

FDR 16
TROUBLESHOOTING GUIDE
Problem Possible cause
Fryer does not Fryer not plugged in
work
Fuse blown
Overheating
Oil overflowing Maximum oil level exceeded
Wet food placed in oil
The oil is old and has
deteriorated
Incorrect oil used/different oils
mixed together
Unpleasant The oil is old and has
Odour/Oil deteriorated
smokes
The oil is not suitable for deep
frying
Poor frying Incorrect temperature used
performance
Basket overloaded
Fresh chips too wet
TECHNICAL PARAMETERS
Model
FDR 16
Solution
Check fryer is plugged in
Check the fuse/circuit breaker
for your installation and replace
the fuse if necessary. If this does
not solve the problem refer to the "service"
Section.
Wait for the fryer to cool and press the "RESTART"
button on the back of the head.
Check oil level
Drain and dry food thoroughly
Replace with fresh oil
Use a good quality oil suitable for deep frying
Replace with fresh oil
Use a good quality oil suitable for deep frying
Select the correct temperature
Reduced the quantity fried
Drain and dry the chips thoroughly
Voltage Power
220-240 V 1500 W
Frequency Capacity
50/60 Hz 1.5 L
16