Anslut 028179 Traduction Des Instructions D'origine page 10

4.1 To disassemble the
LED board
Warning! Disconnect the product from the power out-
let before any maintenance, service or repair is done.
1
Turn the spike counter-clockwise to remove it from
the product. (Figure 4)
2
Remove the 6 hex screws. (Figure 5)
3
Remove the 3 screws. (Figure 6)
4
Remove the 4 welding wires and the LED board.
(Figure 7)
5 Storage
Store the product in a cool and dry space when not in use.
6 Maintenance
6.1 To clean the product
Disconnect the product and clean it with a damp cloth.
7 Disposal
7.1 To discard the product
Make sure that you follow local regulations when you
discard the product. Do not burn the product.
8 Technical data
Specification
Voltage
Power
Luminous flux
LED module
Colour temperature
Protection rating
Lifetime
CRI
Dimmable
Cable length
Measurment
Value
24 V DC
3 W
250 lm
400 lm
3000 K
IP44
30 000 h
80
No
2 x 1 m
Ø300 mm
9