Télécharger Imprimer la page

Important Safety Instructions - Rubbermaid RMD0865-C Guide D'utilisation

Publicité

RMD0865Manual french.qxp
12/12/07
1:15 PM
Page 5

Important Safety Instructions

1. READ ALL INSTRUCTIONS BEFORE USE. If you do not understand these instructions, need clarification or further
explanation, please call our toll free answer line for assistance at 1-800-867-6763.
2. Do not load the cart with more than 1,200 lb (544 kg). Do not use the dumping feature of the cart with a load of more
than 500 lb (226 kg). The weight rating is based on an evenly distributed load.
3. Do not allow children to use the cart without supervision. This cart is not a toy.
4. Do not use this cart for transporting passengers.
5. This cart is not intended for highway use.
6. Do not exceed 5 mph.
7. Distribute the load evenly over the surface of the tray.
8. Do not load items on the top edges of the tray.
9. If any parts become damaged, broken or misplaced, do not use the cart until replacement parts have been obtained.
10. Do not use the cart on surfaces or for transporting objects that can cause damage to the pneumatic tires or tubes.
Do not inflate the tires to more than 32 PSI.
11. It is recommended that the cart be inspected for damage before each use.
12. KEEP THESE INSTRUCTIONS FOR FURTHER REFERENCE.
Assembly Instructions
Your cart requires assembly. Account for all parts and hardware before beginning assembly. If any parts are missing or
damaged, or if you have any questions or need additional instructions, call the manufacturer at 1-800-867-6763.
Tools required for assembly: standard screwdriver, phillips screwdriver and socket set (or two adjustable wrenches).
Step 1
Attach the front axle assembly to the
front frame using M8x20 hex bolts (4),
M8 flat washers (4) and M8 lock nuts
(4). Hand tighten. Attach the M6x20
shoulder bolts (2) and the M6 lock nuts
(2) and M6 flat washers (2) to the outer
ends of the steering linkage.
Step 2
Attach the front struts connecting
the front axle assembly and the
front frame using M8x20 hex bolts
(4), M8 washers (4) and M8 lock
nuts (4). Tighten all bolts from
Step 1 and Step 2 securely.

Publicité

loading