Publicité
Les langues disponibles
Les langues disponibles
Assembly Instructions
1.Carefully remove all parts from the box, check the parts with the
package contents listed above, and make sure all parts are present
before starting to assemble the product.
Do not attempt to assemble the product if any parts are missing or
damaged. Contact customer service for replacement parts.
Component 1
2.Use the wrench (G) included in the package and connect the 4
support legs (D) and the body (A) together with the screws (F).
(figure 1)
Hardware used:
Screws (F)*8pcs
Support legs (D)* 4pcs
Body (A) * 1pc
Before
3. Use the wrench (G) included in the package to connect 1 shelf (E)
to the support legs (D) with screws (F). (figure 2)
08
Component 1
Figure 1
After
Component 2
Hardware used:
Screws (F)*4pcs
Shelf (E)*1pc
Component 1
Before
Figure 2
4. Installation of ash tray and pot holder
Insert the ash tray (C) in the package into the furnace of component
2. And place the pot holder (B) flatly on the furnace body.
Hardware used:
Ash Tray (C)*1pc
Component 2
Pot Holder (B)*1pc
Figure 3
Before
Component 2
After
Component 3
After
09
Publicité
