Télécharger Imprimer la page

CEA GAS11/GASTONE Manuel D'installation

Publicité

Liens rapides

UCS01
Ø60
(Ø2 23/64")
Ø30
(Ø1 3/16")
GAS11
4
(5/32")
Prodotto che necessita di parte incasso
Product that needs built-in part
Staffa ausiliaria per cartongesso / fibrogesso
Auxiliary bracket for plasterboard / fiber-board structures
MANUTENZIONE / MAINTENANCE
NON UTILIZZARE
DO NOT USE
UTILIZZARE
TO USE
Questi disegni sono proprietà di CEADESIGN SRL s.u. pertanto non potranno
essere utilizzati e/o comunicati a terzi, anche in forma parziale, senza preventiva
autorizzazione. CEADESIGN SRL s.u. si riserva il diritto di apportare modifiche ai
disegni al fine di migliorare il prodotto.
CEADESIGN SRL s.u. has the property rights on these drawings, therefore they
cannot be used and/or transferred to third party, even in partial form, without any
prior authorization. Furthermore CEADESIGN SRL s.u. reserves the right to apply
any change to these drawings in order to upgrade the product.
_ REV11
UCS
SYSTEM
DESIGN
NATALINO MALASORTI
GAS11/GASTONE
AISI 316L STAINLESS STEEL
Miscelatore monocomando a parete
Wall mounted single handle mixer
acido clorico e muriatico
HCl
cloric and muriatic acid
acido fluoridrico
HF
hydrofluoric acid
ipoclorito di sodio
NaCl O
chlorine bleach
detergente a pH neutro
pH
7
neutral pH detergent
ceadesign.it

Publicité

loading

Sommaire des Matières pour CEA GAS11/GASTONE

  • Page 1 GAS11 _ REV11 SYSTEM DESIGN NATALINO MALASORTI GAS11/GASTONE AISI 316L STAINLESS STEEL Miscelatore monocomando a parete (5/32”) Wall mounted single handle mixer UCS01 Prodotto che necessita di parte incasso Product that needs built-in part Staffa ausiliaria per cartongesso / fibrogesso...
  • Page 2 GAS11 _ REV11 SYSTEM AVVERTENZE TECNICHE Risciacquare bene le tubazioni prima del montaggio ed evitare sbalzi di pressione fra i raccordi d’acqua fredda e d’acqua calda. In caso di pressioni statiche superiori a 5 bar si raccomanda l’installazione di un riduttore di pressione per evitare danni alla cartuccia.
  • Page 3 GAS11 Conservare gli strumenti inclusi nel prodotto e utilizzati _ REV11 per l’installazione perchè riutilizzabili per i ricambi. RICR031 SYSTEM KD/Z/P/X - S/L* Please, keep the tools included in the item pack and employed for its installation, to re-used them for the spare RICAMBI / SPARE PARTS parts.