Publicité
Les langues disponibles
Les langues disponibles
power inverter
1
the 12 V car's electrical system or clamp the cables with the
clamps directly to the car battery.
z Connecting to a 12 V motor vehicle cigarette lighter
socket
„
Undo the red nut
cable with 12 V motor vehicle cigarette lighter plug
the screw connector
between the fork eyelet and the nut
„
Tighten the red nut
„
Undo the black nut
of the cable with 12 V motor vehicle cigarette lighter plug
opening over the 12 V screw connector
washer is positioned between the fork eyelet and the nut
„
Tighten the black nut
„
Plug the cable with 12 V motor vehicle cigarette lighter plug
vehicle cigarette lighter socket.
Fig. 1
PLEASE NOTE! Due to the high transfer resistances, using the cable with
12 V motor vehicle cigarette lighter plug
heating up. Therefore when working with high loads, use the connection cable
with the
and
10
11
18
GB/IE/NI/CY/MT
using the 12 V vehicle cigarette lighter plug
on the power inverter
16
(see Fig. 1). Make sure that the washer is positioned
7
such that the fork eyelet is held in place.
16
on the power inverter
17
such that the fork eyelet is held in place.
17
connecting clamps.
. Guide the red fork eyelet of the
1
12
.
16
. Guide the black fork eyelet
1
(see Fig. 1). Make sure that the
8
can lead to the plug connection
12
to the socket for
12
and
connecting
10
11
with the opening over
with the
12
.
17
into a motor
12
Publicité
