Publicité
Les langues disponibles
Les langues disponibles
▶ Secure one carabiner of the tool tether to the retaining strap and secure the second carabiner to a
load-bearing structure. Check that both carabiners hold securely.
Comply with the operating instructions of the Hilti retaining strap and those of the Hilti tool tether.
6
Operation
Observe the safety instructions and warnings in this documentation and on the product.
6.1
Selecting the gear
▶ Select the gear.
▶ The gear selector switch can be operated only when the motor is not running.
6.2
Setting forward or reverse rotation
▶ Set the forward/reverse switch to the desired direction of rotation.
▶ An interlock prevents switching while the motor is running. The control switch is locked when the
forward/reverse switch is in the middle position (switch-on interlock).
6.3
Switching on
▶ Press the control switch.
▶ Speed is controlled steplessly up to maximum speed by varying the pressure applied to the control
switch.
6.4
Drilling
1. Set the torque setting ring to the
2. Set the forward/reverse switch to the "forward" position.
6.5
Screwdriving
1. Set the torque setting ring to the required torque setting.
2. Set the forward/reverse switch to the desired direction of rotation.
6.6
Switching off
▶ Release the control switch.
7
Care and maintenance
WARNING
Risk of injury with battery inserted !
▶ Always remove the battery before carrying out care and maintenance tasks!
Care of the product
•
Carefully remove stubborn dirt.
•
Carefully clean the air vents, if present, with a dry, soft brush.
•
Use only a slightly damp cloth to clean the housing. Do not use cleaning agents containing silicone as
these can attack the plastic parts.
•
Use a dry, clean cloth to clean the contacts of the product.
Care of the Liion batteries
•
Never use a battery with clogged air vents. Clean the air vents carefully using a dry, soft brush.
•
Avoid unnecessary exposure of the battery to dust and dirt. Never expose the battery to high levels of
moisture (e.g. by being dipped in water or left in the rain).
If a battery has been soaked by moisture, treat it as a damaged battery. Isolate it in a non-flammable
container and consult Hilti Service.
22
English
4
3
symbol.
2360251
*2360251*
Publicité
