Publicité
Les langues disponibles
Les langues disponibles
Installation Instructions - Dual Retro-Fit Installation
STEP 5 JOINING DUAL INSTALLED UNITS
BOTTOM BACK UNIFICATION
Loosen the two bottom screws of rear access covers of
both units and remove the top screws.
Hang the unification bracket to the bottom screws and
reassemble the screws at the top
Tighten screws to tie units together.
BOTTOM FRONT UNIFICATION
Install the bottom front unification bracket using a 3/8"
driver (4 screws).
31-1000600 Rev. 2
TOP UNIFICATION
screws.
reassemble the rear screws.
Bracket
37
Bracket
Front of appliances
Publicité
