Publicité
Les langues disponibles
Les langues disponibles
Installation Instructions - Dual Integrated Installation
STEP 9 FINAL EXTERNAL UNIT
PREPARATION (Cont.)
Install front mullion and access cover trims between
the 2 units. Open the doors and the flexible dart in
the area between units.
Top dart of the mullion must align with bottom edge
of the case trim.
Open both enclosure doors to 90°.
Snap the trim bracket between the water filter access
enclosures above displays.
Trim
STEP 10 TOE KICK INSTALLATION
Insert Toe Kick into the slot in the Front Access
Cover by rotating it toward you.
Push the bottom
portion of the Toe
Kick towards the
product and slide
into place.
31-1000600 Rev. 2
Mullion Trim
Top Dart
"Dart"
27
STEP 11 INTERNAL UNIT
PREPARATION
Remove all tape, cardboard, and foam from each unit
(foam shipping supports may be located behind the
left and right sides of each of the glass pan fronts on
Refrigerator models).
Remove boxed door bins from shelves.
Unbox and install door bins.
Install door bin mats.
Publicité
