Publicité
Les langues disponibles
Les langues disponibles
The fibre optic cable must not be exposed to
tensile load and must not be twisted. The mini-
mum bending radius is for the 200 µm fiber optic
cable and 15.2 mm.
4 Function
The infrared temperature sensor is equipped with two
open collector outputs which can be used concurrently.
• The instrument's display panel shows a value which
is a percentage relating to the temperature range.
• It generates 2 output signals according to the con-
figured function
OUT1
Switch signal for temperature threshold 1
OUT2
Switch signal for temperature threshold 2
4.1 Switching threshold
• OUTx changes switching status when the configured
upper and lower thresholds (
ed.
First set the upper threshold [
ue based on the temperature span. Then set the lower
threshold [
RP
[
] the lower threshold [
SP
The span remains the same. The lower threshold [
cannot be configured higher than the value of the upper
threshold [
SP
be equivalent, the lower threshold will be a ½ digit lower
than the upper threshold.
]. When you adjust the upper threshold
RP
]. When these parameter values are set to
7
Operating manual PKS
,
) are exceed-
SP
RP
SP
] as a percentaged val-
] will change accordingly.
]
RP
Publicité
