Inventum IMC4535BT Manuel D'utilisation page 46

Note:
The defrost programs only use the microwave function.
8 Troubleshooting
GENERAL TROUBLESHOOTING PROCEDURE
1. Try to find a solution for the problem with the help of the troubleshooting table.
2. If you cannot find a solution for the problem, contact the Inventum-servicedienst
TROUBLESHOOTING TABLE
Problem
The appliance does not start.
The appliance does not start and the
clock display shows a lock.
The display shows '00:00'.
The microwave function does not
start.
Heating food with the microwave
function takes longer.
A function or setting cannot be
selected.
The display shows E-01.
The display shows E-04.
The display shows E-17.
46 • English
Possible cause
There is no power supply.
The mains cable is not connected.
The power is interrupted.
The child lock is activated.
The power was interrupted.
The door is not closed correctly.
The selected microwave power is too
low.
The portion of food is larger.
The food is cold.
The temperature, power or combined
setting is not available for the
selected function.
There is an error.
There is an error.
There is an error.
Possible solution
Do a check on the fuse, if necessary
replace the fuse.
Make sure that the mains cable is
correctly connected to the mains
socket.
Do a check if the power in the
kitchen is working.
Deactivate the child lock. Refer to
'Activating and deactivating
section
the child lock'
.
Set the clock. Refer to section
'Setting the clock'
.
• Do a check if something blocks
the door. If so, remove the
blockage.
• Close the door correctly.
Select a higher microwave power.
'Power settings for
Refer to section
microwave cooking'
.
Larger portions of food take longer to
heat. Select a longer cooking time.
Stir the food during the cooking.
Make sure that you select a setting
that is available for the selected
function.
Contact the Inventum-servicedienst.
Contact the Inventum-servicedienst.
Contact the Inventum-servicedienst.