Publicité
Les langues disponibles
Les langues disponibles
using a brush. If painting remains at the bottom, clean with a cotton bud. Finally, pour in
some thinner or water (depending upon the painting used) and turn on the air brush to
spray a few times to confirm that it is clean.
Spray gun maintenance
(1) Cleansing after short-term use:
Press the on/off switch on the hub to turn on. Pour some detergent or banana oil into
the feeding cup and block the nozzle with napkin. Wait for several minutes until the liquid
in the feeding cup is colorless.
(2) Cleansing after long-term use:
Painting may residue after long-term use. It is recommended to disassemble and clean
the air brush for better performance.
1. Follow the step in Cleansing after short-term use.
2. Pour into the feeding cup with detergent or banana oil (detergent is preferred as
banana oil is corrosive). Turn on the air brush to spray a few times until the painting
sprayed is colorless.
3. Disassemble the spray gun by loosening the nut. (See Fig. F1, F2) Carefully wipe clean
the needle, feeding cup and the nozzle. Finally, find a soft box to place the needle. Do
not assembly the spray gun immediately.
Next time if the air brush does not work after assembly, the airbrush must be completely
disassembled for cleaning.
4. Ultrasonic cleaning is also workable. Just put the spray gun in the liquid and turn on
EN
the ultrasonic instrument.
14
ENVIRONMENTAL PROTECTION
Waste electrical products must not be disposed of with household waste.
Please recycle where facilities exist. Check with your local authorities or
retailer for recycling advice.
FOR BATTERY TOOLS
The ambient temperature range for the use and storage of tool and battery is
0°C-45°C.
The recommended ambient temperature range for the charging system during
charging is 0°C-40°C.
DECLARATION OF CONFORMITY
We,
Positec Germany GmbH
Postfach 32 02 16, 50796 Cologne, Germany
Declare that the product
Description Battery operated air brush
Publicité
