D Devices D HEATER Manuel De L'utilisateur page 5

preset temperature.
Notice:
In the setting mode, long press the "+" or "-" to quickly increase or decrease the preset temperatu-
re, integer within the preset temperature 40-70 can be selected.
• In the working state of the circuit,press the"ON/OFF"/"SET",it stops working and goes into
standby state. And then press the "+"or "-" to the setting mode.
5 Technical parameter
• Power adapter: Input: AC100-240V50/60Hz, Output: DC15V2A
• Heating temperature range: 40ºC-70ºC, ±1ºC
6 Clean
The heating base can be wiped and disinfected with alcohol cotton ball, the whole machine cannot
be immersed in liquid.
Notice:
When cleaning the surface of the heating base, the power cord must be disconnected firstly.
Wait for the HEATER base to cool, then clean.
7 Transportation and storage environment
The product should be stored in a ventilated, dry, cool, away from heat source, and no corrosive
gas.
It should be protected from moisture, light, and heat sources during transportation.
Storage conditions
Transportation conditions
8 Warranty
1 year.
Notice:
1. The heater will have high temperature when use, please do not burn.
2. When using,avoid scratching the surface of the heating body and the base.
106
50 10
KPa
Air pressure Humidity
Moistureproof Sun protection
90
+70
-25
% ºC
Temperature
5