JVC RA-F120B Manuel D'instructions page 32

Checking alarm time
Press and hold AL1 or AL2 for 2 seconds, the alarm time will flash on the display.
To turn off the alarm, press POWER and the alarm will come on again at the set
time on the following days.
To cancel the alarm, repeatedly press AL1 or AL2 until the alarm indicator light goes
out on the display.
Snooze function
This function can be used to stop the alarm temporarily for about 9 minutes once the
alarm is activated. When the snooze button is pressed, the buzzer or radio alarm
sounds will stop and sound again after about 9 minutes.
SLEEP TIMER ORERATION
The sleep function is designed to automatically turn off the Radio.
Setting sleep timer
1. Press SLEEP.
 "90" will illuminate on the display.
2. Repeatedly press SLEEP to select the desired sleep
time from 90, 80, 70, 60, 50, 40, 30, 20 or 10 minutes.
3. The radio will be turned off after the selected time has elapsed.
To check remaining sleep time, press SLEEP.
To cancel sleep timer, press SLEEP until "OFF" is
selected.
To turn off the radio before the sleep time has elapsed, press POWER.
SPECIFICATIONS
Power source
Power consumption (clock only)
Frequency range
Power Output
Clock backup
: 2 x 1.5V AAA size batteries (not included)
Alternating Current
: AC 230V~ 50Hz, 5W
: < 1W
: AM 522-1620 kHz
FM 87.5 – 108 MHz
: 0.3W RMS
EN-5