Publicité
Les langues disponibles
Les langues disponibles
1. POWER
2. DISPLAY
3. VOLUME / AL1
4. VOLUME / AL2
5. FM AERIAL
6. TUNING / HR
DISPLAY
14. Alarm 1 buzzer indicator
15. Alarm 1 radio indicator
BATTERY BACKUP
The clock, alarm and preset stations settings can be protected against AC power failure
with the batteries for a short period of time. If no backup batteries are installed or the
power failure is prolonged, you will need to set the clock again.
STANDBY MODE
Place the unit on a flat stable surface and plug the power cord into the mains socket.
The unit is in standby mode and "0:00" will flash on the display.
SETTING THE CLOCK
In standby mode, press and hold SET until the display flashes.
1.
Repeatedly press HR to set the hours.
2.
Repeatedly press MIN to set the minutes.
3.
Press SET to confirm.
4.
The hour and minute digits will stop flashing.
POWER ON/RADIO MODE
Press POWER to switch the unit on and enters the radio mode.
The radio frequency will briefly appear on the display and then return to clock
time.
7. TUNING / MIN
8. SLEEP
9. SET
10. SNOOZE
11. BAND
12. MEM
13. BATTERY COVER
16. Alarm 2 buzzer indicator
17. Alarm 2 radio indicator
EN-3
Publicité
