Publicité
Les langues disponibles
Les langues disponibles
Inserting/ejecting the card
Be sure to use a 3V (3.3 V) card. Non-Olympus 3 V (3.3 V) cards must be
formatted with the camera. Do not use a 5 V card or a 2 MB card.
Make sure the camera is turned off (i.e. the lens barrier is closed and
1
the monitor if turned off).
2
Open the card cover.
Card cover
3
Inserting the card
Insert the card all the way with the contact area
facing towards the lens side so that the label's
edge is aligned with the guideline (
on the camera.
● Insert the card while keeping it straight. Be
sure not to insert it an angle.
● Note the orientation of the card. If it is inserted
incorrectly, it may become jammed.
● If the card is not inserted fully, the card cover
will not close. Closing the card cover forcibly
will damage the card cover.
3
Ejecting the card
Grasp the card and pull in straight out.
4
Close the cover tightly.
É
) printed
Guideline
17
Publicité
