Publicité
Les langues disponibles
Les langues disponibles
Assemble:
1. Install the 4 pcs of legs by joining the upper legs and lower legs according
to the same marks (A+A，B+B，C+C，D+D).
A
A
B
B
2. Insert 4 pcs of legs in chair holder by 4 screws+ 4 washers.
ABCD legs are same, no position request.
Do not tighten the screws until the foot is installed.
3. Insert footrest in 4 pcs of legs by 4 screws+ 4 washers.
Instructions:
Make sure that four legs all standing
on the floor, and then tighten 4 screws
on the top of the legs and 4 screws on
the footrest. It can avoid unstable
during the assembling.
06
C
C
D
D
The footrest can be double-sided
used according to different ages.
When using the other side, the
footrest will be adjusted to
another height.
4. Push the tray on chair.
Please check the tray is locked well by button before use.
5. Make sure the both sides buttons
of transparent tray has locked after
putting on the chair tray.
6. Take off tray: Press the buttons on both sides and pull the tray outward.
07
Publicité
