Tesla RS3600FM Mode D'emploi page 8

ENG
Starting to use
• Before initial start, keep the refrigerator still for half an hour before
connecting it to power supply.
• Before putting any fresh or frozen foods, the refrigerator shall have run for
2-3 hours, or for above 4 hours in summer when the ambient temperature
is high.
• Spare enough space for convenient opening of the doors and drawers.
• The picture above is only for reference. The actual configuration will
depend on the physical product or statement by the distributor
Energy saving tips
• The appliance should be located in the coolest area of the room, away from heat producing appliances
or heating ducts, and out of the direct sunlight.
• Let hot foods cool to room temperature before placing in the appliance. Overloading the appliance
forces the compressor to run longer. Foods that freeze too slowly may lose quality, or spoil.
• Be sure to wrap foods properly, and wipe containers dry before placing them in the appliance. This cuts
down on frost build-up inside the appliance.
• Appliance storage bin should not be lined with aluminum foil, wax paper, or paper toweling. Liners
interfere with cold air circulation, making the appliance less efficient.
• Organize and label food to reduce door openings and extended searches. Remove as many items as
needed at one time, and close the door as soon as possible.
STRUCTURE AND FUNCTIONS
Key components
The picture above is only for reference. The actual configuration will depend on the physical product or
statement by the distributor.
Shelf
Shelf
Shelf
Shelf
Shelf
Shelf
Drawer
Drawer
Door tray
Door tray
Door tray
Door tray
Door tray
8