Publicité
1. If the appliance has a lid/hood, open it.
2. Ensure all knobs are in the off position. Open the gas control valve
on the gas bottle or regulator.
3. Push and turn the control knob counterclockwise to the maximum
rate, the sound of "da" will be heard and then the burner is ignited.
4.If burner fails to ignite, push and turn control knob to the 'OFF'
position and turn gas off at the bottle or regulator. Wait five minutes,
then repeat the above steps.
5.After successful lighting, light each burner as desired.
6.After ignition, the burners should be burned at the high position for
3-5 minutes in order to preheat the appliance. This process should be
done before every cooking session.
7. After completion of preheating, turn the burners to low position for
best cooking results.
8.After use, push and turn all the control knobs to the 'OFF' position.
- 41 -
Publicité
