Costway CM24546 Mode D'emploi page 3

*The reference number is indicated on the carton above the gencod.
No tools are required for the assembly.
Number of tree parts is only for tree, base and power line are not
included.
Before beginning
Check whether all parts have been delivered.
Save the carton box for storing your tree.
NO. PART LIST
A
B
C
D
E
F
04
QTY
DESCRIPTION
/PCS
TREE TOP
1 PC
1 PC
UPPER PART
4.5FT or
5FT(135
150 CM)
LOWER PART
1 PC
CM24562
only have
part A, C,
BASE
1 PC
POWER LINE AND
1 PC
TRANSFORMER
Only for 3
REMOTE and 9
1 PC
CONTROLLER
lighting
modes tree
Assembly instructions
1 - Assemble the base (as indicated on the
figure 1 ) on a stable surface, such as
indicated on the cardboard packaging.
Unfold the base and insert the screw as
indicated on figure 1b.
2 - Remove the plastic caps and pearl cotton on the end of each
part. If they were broken or missing during transportation, pleas
TIPS
don't worry, they are just for protecting the pole. Insert the trunk in
the base as indicated. When the trunk consists of more than one
part, begin by inserting into the base (Part D) the part of trunk
carrying the longest branches (Part C), as successively to assemble
the other parts of trunk (Part B), by ending with the smaller branches
(Part A) at the top of the tree.
CM,
tree,
D, E.
3 - Unfold one by one the branches beginning by the lower branches.
Each branch tip must be shaped to it's proper position to give the tree
a natural look. This is done by gently grasping the left and right wing
tips and spreading them out away from the centre tip. For fast shape
tree, it features 100% memory wire construction with interlocking
sections that spring into fullness. During the shaping, the snow
powder and leaves may drop down.
4.5 FT, 5 FT(135 CM,
150 CM)
TREE,CM24562
Figure 1
6FT, 7FT, 7.5FT,
8FT(180 CM, 210 CM,
225 CM, 240 CM) TREE
05