Aria X2 Mode D'emploi page 11

I N S TA L L AT I O N I N S T R U C T I O N S
DISCONNECT POWER BEFORE PERFORMING ANY MAINTENANCE!
ELECTRICAL CONNECTIONS
A qualified electrician should be used for all electrical connections and/or installations.
USE CAUTION WHEN POWER LINKING OTHER MODEL DEVICES AS THE POWER
CONSUMPTION OF OTHER MODEL DEVICES MAY EXCEED THE MAXIMUM POWER
OUTPUT OF THIS DEVICE. CHECK SILK SCREEN FOR MAXIMUM AMPS.
THE ARIA X2 TRANSCEIVER IS DESIGNED TO BE TRUSS-MOUNTED; HOWEVER,
IT CAN BE USED STAND-ALONE, WHERE THE DEVICE MUST SIT ON A FIRM FLAT
SURFACE.
Device MUST be installed following all local, national, and country commercial electrical and construction
codes and regulations.
POWER LINKING
USE CAUTION WHEN POWER LINKING AS THE POWER CONSUMPTION MAY
EXCEED THE MAXIMUM POWER OUTPUT ON THIS DEVICE. CHECK SILK SCREEN
FOR MAXIMUM AMPS.
11