After-Cleaning Care (continued)
7. Use a cloth to remove debris
from the red filter.
10. Use both hands to push top
of nozzle, both left and right
sides, until it clicks into place.
WARNING
electrical outlet before performing maintenance or troubleshooting.
8. Use a cloth to thoroughly
clean brush roll cover.
11. Reinstall tank by angling it
with bottom first, then tilt and
push until it clicks into place.
To reduce the risk of fi re, electric shock or injury, turn power OFF and disconnect plug from
9. Reinstall nozzle, ensuring it
aligns with slot on brush roll
cover.
BISSELL.ca 7