Publicité
Emptying the Dirty Water Tank
1. Turn OFF and unplug
machine. Pull dirty water tank
up and away to remove.
After-Cleaning Care
1. Turn OFF and unplug
machine. Pull dirty water tank
up and away to remove.
4. Clean and rinse debris from
float to prevent dirty water
tank overflow and maintain
seal integrity.
6 BISSELL.ca
2. For quick empty: Pull
rubber tab (located in middle
of tank) and tilt to pour. When
closing rubber tab, make sure
all edges are sealed tight.
2. Empty dirty water tank.
5. After cleaning, align arrow
on float with tank's notch.
Twist ring to lock in place.
Ensure alignment to prevent
water leakage.
3. Reinstall tank by angling it
with bottom first, then tilt and
push until it clicks into place.
3. Unscrew ring at bottom of
tank to remove float stack.
6. Pull the nozzle upward and
away from the machine. Rinse
or wipe it clean.
CONTINUED ON NEXT PAGE
Publicité
