Publicité
Les langues disponibles
Les langues disponibles
Pre-Installation
LEVELLING FEET
Schematic diagram of the levelling feet.
Adjusting procedures:
a. Turn the feet clockwise to raise the refrigerator;
b. Turn the feet counterclockwise to lower the refrigerator;
c. Adjust the right and left feet based on the procedures above to a horizontal level.
REVERSE THE DOOR SWING
Follow all steps when reversing the door swing. Failure to follow these instructions, leaving off parts,
WARNING:
or overtightening screws, can lead to the door falling off and result in injury and property damage.
NOTE:
When reversing the door swing.
• Read the instructions all the way through before starting.
• Handle parts carefully to avoid scratching paint.
• Set screws down by their related parts to avoid using them in the wrong places.
• Provide a non-scratching work surface for the doors.
• It is recommended that 2 people perform this task.
IMPORTANT: Once you begin, do not move the cabinet until door-swing reversal is completed.
These instructions are for changing the hinges from the right side to the left side—if you ever want to change the hinges back to the right side,
follow these same instructions and reverse all references to left and right.
Tools Required
/
in. Socket driver
5
16
Phillips screwdriver
Putty knife or thin-blade screwdriver
8
Publicité
