Vissani MDTF18WHR Guide D'utilisation Et D'entretien page 10

Pre-Installation
3
Install the hinge
Unscrew screws of the bottom hinge, then remove the
bottom hinge from the bottom right side of the refrigera-
tor.
Unscrew the hinge shaft from the right side of the bottom
hinge and move it to the left side, then secure the bottom
hinge to the bottom left side of the refrigerator, using the
screws you removed previously.
Part Description
G Hinge shaft
H Bottom hinge
I Left door self-locking block
J Left door open stopper
K Top sleeves
L Hole cap
M Sleeves
N Bottom stopper
O Lower door self-locking block
4
Install door stopper
Remove the sleeves from the top right of doors and hole cap
from top left of doors, and assemble them on the opposite
sides.
Remove the refrigerator door bottom stopper and self-locking
block, then install them to the opposite side. Remove the freezer
right door open stopper and save them to reuse. Take out the
left freezer self-locking block and left door open stopper from
accessory bag in the refrigerator and installed on the left of-
freezer door.
I
J
L
G
H
O
Quantity
1
1
1
1
1
1
1
1
1
10
K
M
N