Publicité
Les langues disponibles
Les langues disponibles
CLEANING AND MAINTENANCE (CONTINUED)
End of Season Storage and Maintenance:
If the appliance will not be used for a long time, follow these steps:
1.
Be sure to drain the leftover water condensate. Remove the lower drain plug and use a drain pan
to collect the water (make sure to replace the drain plug cap when finished).
2.
To dry excess moisture, run the unit in Fan-only mode for 30 minutes before storing.
3.
Turn off and unplug the Portable Air Conditioner from the power supply.
4.
Remove the dust filter and clean with water. Dry the dust filter and then reinstall.
5.
Disconnecting the Window Installation Kit:
•
Carefully remove the exhaust hose from the back of the unit.
•
Carefully remove and uninstall the Window Bracket and Window Panel Adapters
from the window.
•
It is recommended to store the Window Kit parts in a bag together with the Remote Control
and Drain Tube, placing them together with the Portable Air Conditioner unit.
•
If needed, you can clean the Window Kit with a damp cloth and water before storing.
Make sure all parts of the Window Kit are dry before storage.
6.
Cover the Portable Air Conditioner with a cloth before storage to prevent dust and scratches from
collecting on the surface of the unit.
7.
It is recommended to coil the power cord before storing to ensure the cord is protected from
bends and creases.
8.
Store the Portable Air Conditioner in a cool, dry place, away from direct sunlight.
EN
13
Publicité
