Publicité
Les langues disponibles
Les langues disponibles
Specifications
Model: SMS2
Wireless connection: Thread + Bluetooth Low Energy 5.0
Motion detection: 5~10 meters, 100 ° (16~33 ft, 100 °)
Operating temperature: -10℃~ 45℃ (14℉~113℉)
Operating humidity: 5%-95% RH
Accuracy: Typical±0.3℃, Typical±5% RH
Dimension: 64 x 50 x 37mm (2.52 x 1.97 x 1.46 inch)
Power: 2 × AAA Replaceable Alkaline Batteries
Battery standby time: 1 year
Usage: Indoor use only
Installation
1. Place SMS2 on a flat surface of a shelf, table or desk.
2. To install with the stickers, please clean the target surface, peel off the sticker cover and stick
the device on the surface.
3. To install with the screws, please take off the battery cover, and screw onto the 2 spots.
4. If the SMS2 is deployed outdoor, please make sure the device is protected from water.
Tips
1. Clean and dry the target surface before deploying SMS2 base on.
2. Keep the setup code label for future use.
3. Do not clean with liquid.
4. Do not attempt to repair the product.
5. Keep the product away from children under the age of three.
6. Keep the Onvis SMS2 in clean, dry, indoor environment.
7. Be sure the product is adequately ventilated, is positioned securely, and do not place it near
other sources of heat (e.g. direct sunlight, radiators, or similar).
Publicité
